Specifications

Enterasys Wireless Controller Software CLI Reference Guide 18-1
18
VNS Commands (vnsmode)
ThissectiondescribescommandsusedtodefineandconfigureVirtualNetworkServices(VNS)
forthenetwork.ThesecommandsarelocatedinthevnsmodecontextoftheCLI.Executethe
vnsmodecommandattherootleveltoentervnsmodecontext.
Thefollowingcommandsareavailableinthevnsmodecontext:
• adminctr—See
adminctrforcommandsinthevnsmode:adminctrcontext.
• create
• das—Seedasforcommandsinthevnsmode:dascontext.
• default‐policy—Seedefault‐policyforcommandsinthevnsmode:default‐policycontext.
• delete
• radius—Seeradiusforcommandsinthevnsmode:radiuscontext.
• rateprofile—Seerateprofileforcommandsinthe
vnsmode:rateprofilecontext.
• <named‐VNS>—See<named‐VNS>forcommandsinthevnsmode:<nam ed‐VNS>context.
18.1 adminctr
Executingtheadminctrcommandmovesyouintothevnsmode:adminctrcontextinwhichyou
configureseveralglobalQoS(QualityofService)settings.Thiscontextcontainsglobaladmission
controlcommandstoconfigureflexibleclientaccessandtocontroltheamountofbandwidthfor
voiceandvideoapplicationsonWirelessAPs.
Thefollowingcommands
areavailableinthevnsmode:adminctrcontext:
• flex‐client‐access
• max‐video‐assoc
• max‐video‐reassoc
• max‐voice‐assoc
• max‐voice‐reassoc
Note: All CLI commands cache changes. For this reason, sometimes when you make a change in a
particular context, the change may not be visible immediately. If this happens, you must exit and re-
enter the context in order to ensure that the database is synchronized with the latest change.