Specifications

Enterasys Wireless Controller Software CLI Reference Guide 16-1
16
traffic_capture Commands
Thetraffic_capturecommandreferstotraffic_capturecontext,whichcontainsthecommandsto
managetheTCPDump.Thetraffic_captureisaccessiblefromtherootcontextoftheCLI.
Thefollowingcommandsareavailableinthetraffic_capturecontext:
• file_name
• size
• destination
• interface
• delete
• list
• start
• stop
• show
• showinterfaces
16.1 file_name
Usethefile_namecommandtospecifyafilenamefortheTCPDump.Thefile_namecommandis
accessiblefromthetraffic_capturecontextoftheCLI.
Syntax
file_name <fileName>
Parameters
Examples
Thefollowingexamplespecifies thefilenameasTrafficCapturefortheTCPDump.
EWC.enterasys.com:traffic_capture# file_name TrafficCapture
Note: All CLI commands cache changes. For this reason, sometimes when you make a change in a
particular context, the change may not be visible immediately. If this happens, you must exit and re-
enter the context in order to ensure that the database is synchronized with the latest change.
<fileName> SpecifiesthefilenamefortheTCPDump