Specifications

Enterasys Wireless Controller Software CLI Reference Guide 15-3
EWC.enterasys.com:time# ntp 3
15.4 ntpip
UsethentpipcommandtoconfiguretheIPaddressofupto3standardNTPtimeservers.Usethe
noformofthecommandtoremoveanIPaddressbyitsindexnumber.
Syntax
ntpip (1|2|3) <IP Address>
no ntpip (1|2|3)
Parameters
Examples
ThefollowingexampleconfigurestheIPaddressofanNTPtimeserverandassignsitanindex
valueof2
EWC.enterasys.com:time# ntpip 2 192.168.4.89
15.5 tz
UsethetzcommandtosettimezoneinformationfortheEnterasysWirelessController.
Syntax
tz continent <continent> country <country> region <region>
Parameters
Examples
Thefollowingexamplesetsthetimezoneinformation
EWC.enterasys.com:time# tz continent america country united states region new_york
Note: If you want to use the external NTP Server, you must configure the NTP Server’s IP address
by running the ntpip command. For more information, see the following section.
1|2|3 Indicatestheinde xnumberonthelistofconfiguredNTPtimeservers
<IPAddress> SpecifiestheIPaddressofanNTPtimeserver
<continent> Specifiesthecontinent
<country> Specifiesthecountry
<region> Specifiestheregion
Note: The Enterasys Wireless Controller reboots when the time zone is changed.