Specifications

15-2 time Commands
Examples
Thefollowingexamplesetsthesystemtimeto12:01pm
EWC.enterasys.com:time# clock 12:01
15.2 date
Usethedatecommandtosetthesystemdate.
Syntax
date dd:mm:yyyy
Parameters
Examples
ThefollowingexamplesetsthedatetoJanuary17,2099
EWC.enterasys.com:time# date 17:01:2099
15.3 ntp
UsethentpcommandtousetheNetworkTimeProtocol(NTP).Usethenoformofthecommand
todisableit.
Syntax
ntp [2|3]
(no) ntp [1|2|3]
Parameters
Examples
Thefollowingexamplespecifies tousetheinternalNTPServertosynchronizethenetworktime
Note: After you run the clock command, you must run the apply command to implement the
changes.
Note: The Network Time Protocol must be disabled before this command can be used. For more
information, see “ntp” on page 15-2.
dd Specifiestheday
mm Specifiesthemonth
yyyy Specifiestheyear
2SpecifiestousetheexternalNTPServertosynchronizethenetwork
time
3SpecifiestousetheinternalNTPServertosynchronizethenetwork
time