Specifications

Enterasys Wireless Controller Software CLI Reference Guide 14-1
14
syslog Commands
ThissectiondescribescommandstoconfigureSystemLogsettingsontheEnt erasysWireless
Controller.ThesecommandsarelocatedinthesyslogcontextoftheCLI.
Thefollowingcommandsareavailableinthesyslogcontext:
• audmsg
• facility
• svcmsg
• syslogip
14.1 audmsg
Usetheaudmsgcommandtoenableservicemessages.Usethenoformofthecommandtodisable
them.
Syntax
audmsg
no audmsg
Parameters
None
Examples
ThefollowingexampleenablesservicemessagesontheEnterasysWirelessController
EWC.enterasys.com:syslog# audmsg
14.2 facility
Usethefacilitycommandtoupdateapplicationandservicelogstothesyslogserver.
Note: All CLI commands cache changes. For this reason, sometimes when you make a change in a
particular context, the change may not be visible immediately. If this happens, you must exit and re-
enter the context in order to ensure that the database is synchronized with the latest change.
Note: Application logs and service logs cannot use the same log level at the same time.