Specifications

13-4 snmp Commands
13.6 port
UsetheportcommandtospecifythedestinationportfortheSNMPtraps.
Syntax
port <value>
Parameters
Examples
ThefollowingexamplesetsthetrapportoftheSNMPmanagerto163.
EWC.enterasys.com:snmp# port 163
13.7 publish-ap
Usethepublish‐apcommandtoenableordisableSNMPpublishingoftheaccesspointasan
interfacetotheEnterasysWirelessController.
Syntax
publish-ap (enable|disable)
Parameters
Examples
ThefollowingexampleenablesSNMPpublishing.
EWC.enterasys.com:snmp# publish-ap enable
IfyouattempttoenableSNMPpublishwhenLLDPisenabledononeormoreAPs,youwillget
thefollowingwarning:
WARNING: LLDP is enabled for some Wireless APs. Would you like to continue?
(C) Cancel
(P) Proceed
(O) Disable LLDP and proceed
Typeoneofthefollowing:
• C–CancelstheSNMPconfigurationandreturnstotheAPcontext.
• P–EnablesSNMPpublishingandmaintainsLLDPenabled
• O–EnablesSNMPanddisablesLLDP
<value> SpecifiesthetrapportoftheSNMPmanager.Thevaluecanrange
from1to65535.
enable|disable Enablesordisablespublishingoftheaccesspointasaninterfacetothe
controller.