Specifications

Enterasys Wireless Controller Software CLI Reference Guide 13-3
Examples
ThefollowingexampleenablesSNMPv3.
EWC.enterasys.com:snmp# enable v3
13.4 engine-id
Usetheengine‐idcommandtoconfiguretheSNMPv3engineIDfortheEnterasysWireless
ControllerrunningtheSNMPagent.
Syntax
engine-id <string> [auto-gen]
Parameters
Examples
Thefollowingexamplespecifies theSNMPv3engineIDoftheSNMPagent.Notethatresetting
theengine‐idwillresetallusers.
EWC.enterasys.com:snmp# engine-id aaaaaaa
All users will be reset.
(yes/no):no
Warning : Operation to update engine ID cancelled.
13.5 location
Usethelocationcommandtoenteradescriptivestringindicatingthephysicallocationofthe
EnterasysWirelessControllerrunningtheSNMPagent.
Syntax
location <string>
Parameters
Examples
Thefollowingexamplespecifies thelocationoftheSNMPagent.
EWC.enterasys.com:snmp# location Blue Office - Second Floor
<string> SpecifiestheSNMPv3engineIDfortheEnterasysWirelessController
runningtheSNMPagent.Thestringmustbefrom5to32charactersin
lengthwhenauto‐genisnotselected,andfrom1to27characterswhen
auto‐genisselected.
[auto‐gen] AutomaticallygeneratestheSNMPv3engineIDfromthe
manually
enteredstring.
<string> SpecifiesthelocationEnterasysWirelessControllerrunningtheSNMP
agent