Specifications

13-2 snmp Commands
Examples
Thefollowingexamplespecifies anametoidentifytheSNMPadministrator.
EWC.enterasys.com:snmp# contact Bill
13.2 context
UsethecontextcommandtoaddanSNMPv3context.
Syntax
context <string>
Parameters
Examples
Thefollowingexamplespecifies theSNMPv3context.
EWC.enterasys.com:snmp# context context1
13.3 enable
UsetheenablecommandtoenableandconfigureSNMP.
Syntax
enable (none|v1v2|v3) [<contact> <location> <rcommunity> <rwcommunity>
(1|2|3|4|5) <1-65535>]
Parameters
<string> Specifiesthecontextname
none DisablesSNMP
(v1v2|v3) EnableseitherSNMPv1/V2orSNMPv3
<contact> SpecifiesthenameoftheSNMPadministrator
<location> SpecifiesadescriptionforthelocationoftheSNMPadministration
machine
<rcommunity> Specifiesanamefortheread‐onlynetworkmanagementcommunity
<rwcommunity> Specifiesanamefortheread‐writenetworkmanagementcommunity
1ForwardstheSNMPtrapwiththeCriticalseveritylevel

2ForwardstheSNMPtrapwiththeMajorseveritylevel
3ForwardstheSNMPtrapwiththeMinorseveritylevel
4ForwardstheSNMPtrapwiththeInformationalseveritylevel
5ForwardstheSNMPtrapwiththeTraceseveritylevel
<0‐65555> SpecifiesthedestinationportfortheSNMPtraps