Specifications

12-2 schedule_upgrade Commands
Examples
Thefollowingexampleschedulesalocalupgrade.
EWC.enterasys.com:schedule_upgrade# schld_upgrd 06:01:12:00 local AC-MV-
07.41.03.0003-1.gps
Thefollowingexampleschedulesaremoteupgrade.
EWC.enterasys.com:schedule_upgrade# schld_upgrd 06:01:12:00 remote 192.168.4.10
test abc123 /ac/rpm/build07.41.03.0003 AC-MV-07.41.03.0003-1.gps
12.2 upgrade_backup
Usetheupgrade_backupcommandtocreatearescuebackupoftheexistingsoftwareofthe
EnterasysWirelessControllerontheremoteFTPserver.Usethenoformofthecommandtodelete
theremoterescuebackup.
Theupgrade_backupcommandisaccessiblefromtheschedule_upgradecontext.
Syntax
upgrade_backup (local|flash|remote <server> <user> <password> <dir> <file>)
no upgrade_backup
Parameters
user TheusernametoaccesstheFTPserver
password ThepasswordtoaccesstheFTPserver
dir Thepathtothedirect orywherethenewsoftwareisstored
ontheFTPserver
imagename Thenewsoftware’sfilename
Note: Before you can schedule a local uprade, you must download the upgrade image to the
controller.
Note: If you want to delete the existing local upgrade schedule, you must add no before the local
upgrade syntax as shown in the following example.
EWC.enterasys.com:schedule_upgrade# no schld_upgrd
Note: If you want to delete the existing remote upgrade schedule, you must add no before the
remote upgrade syntax as shown in the following example.
EWC.enterasys.com: schedule_upgrade# no schld_upgrd
upgrade_backup SpecifiestobackuptheexistingsoftwareoftheEnterasys
WirelessControllerbeforeinitiatingtheupgradeprocess
flash<filename> Specifiesthatthebackupimageoftheexistingsoftwareof
theEnterasysWirelessControlleristobesavedontheflash
card.Thisoptionisonlyavailableifanexternalflashcard
hasbeen
mountedonthecontroller.Backupfilenamecan
optionallybeprovided,butitmustendwithʺ‐rescue‐
user.t gzʺ.