Specifications

Enterasys Wireless Controller Software CLI Reference Guide 11-1
11
schedule_backup Commands
Thissectiondescribescommandsforschedulingthebackupofthefollowingreportsanddatabase:
•Softwareconfigurations
•CDRs
•Logs
•AuditReport
•RogueAPsReport
Thissectiondescribescommandswhichmanageschedulingoptionsforthebackupofdatatoan
FTPorSCPaddress.Thesecommandsarelocatedintheschedule_backupcontextoftheCLI.
The
followingcommandsareavailableintheschedule_backupcontext:
• dir
• freq
• password
• protocol
• server
• starttime
• type
• user
Note: If you do not specify the FTP or SCP server’s IP address, the reports and database will be
saved on the local drive of the HiPath Wireless Controller.
Note: All CLI commands cache changes. For this reason, sometimes when you make a change in a
particular context, the change may not be visible immediately. If this happens, you must exit and re-
enter the context in order to ensure that the database is synchronized with the latest change.
Note: After running the schedule_backup commands, you must run the apply command to
implement the changes.