Specifications

10-4 mobility Commands
Examples
Thefollowingexampleconfiguresthesecuritymodetohavenorestrictions,allowingallagentsto
connecttothemanager
EWC.enterasys.com:mobility# secmode none
10.7 mdismethod
UsethemdismethodcommandtolocatetheMobilityManageronthenetwork.
Syntax
mdismethod (slpd|static)
Parameters
Examples
ThefollowingexampleusestheSLPdiscoverymethod
EWC.enterasys.com:mobility# mdismethod slpd
10.8 mmanagerip
UsethemmanageriptospecifytheIPaddressoftheMobilityManager.
Syntax
mmanagerip <IP Address>
Parameters
Examples
ThefollowingexamplechangestheIPaddressoftheMobilityManager.
EWC.enterasys.com:mobility# mmanagerip 195.160.1.39
slpd UsestheServiceLocationProtocol(SLP)Discoverymethod
static UsesastaticallyconfiguredIPaddressfordetection
Note: The role of the Enterasys Wireless Controller must be set to Agent before this option
becomes available. For more information, see “mrole” on page 10-1.
<IPAddress> SpecifiestheIPaddressoftheVNManager