Specifications

10-2 mobility Commands
EWC.enterasys.com:mobility# mrole agent
10.2 mport
UsethemportcommandtoselecttheporttobeusedbytheMobilityfeature.
Syntax
mport <esaX>
Parameters
Examples
Thefollowingexampleselectstheesa3port
EWC.enterasys.com:mobility# mport esa3
10.3 mheartbeat
TheEnterasysWirelessControllerthathastheVNManagerdesignationsendsregularHeartbeat
messagescontaininginformationregardingwirelessdevicesessionchangestotheVNAgents,and
waitsforanupdatemessagetocomeback.
Usethemheartbeatcommandtosetthetimeinterval(inseconds)fortheconnection
establishmentresponsebetweentheMobility
AgentandtheMobilityManager.
Syntax
mheartbeat <value>
Parameters
Examples
Thefollowingexamplesetstheoutgoingheartbeatstooccurat5secondintervals.
EWC.enterasys.com:mobility# mheartbeat 5
10.4 slpreg
UsetheslpregcommandtoenableSLPregistration.Usethenoformofthecommandtodisableit.
Syntax
slpreg
no slpreg
Parameters
None
<esaX> SpecifiestheESAport,whereXreferstotheportnumber
<value> Specifiestheintervaltimeinsecondsbetweenoutgoingheartbeats