Specifications

Enterasys Wireless Controller Software CLI Reference Guide 10-1

mobility Commands

MultipleEnterasysWirelessControllersonanetworkcanshareandexchangeclientsession

information,whichenablesawirelessdevicetoroambetweenWirelessAPsondifferentEnterasys

WirelessControllerswithoutserviceinterruption.

Thissectiondescribesthe commandsrequiredtoconfiguretheMobilityoptionsfortheEnterasys

WirelessController.Thesecommandsare

locatedinthemobilitycontextoftheCLI.

Thefollowingcommandsareavailableinthemobilitycontext:

• mrole

• mport

• mheartbeat

• slpreg

• agent

• secmode

• mdismethod

• mmanagerip

10.1 mrole

UsethemrolecommandtosettheroleoftheEnterasysWirelessController.

Syntax

mrole (none|manager|agent)

Parameters

Examples

ThefollowingexamplesetstheroleoftheEnterasysWirelessControllerasaMobilityAgent.

Note: All CLI commands cache changes. For this reason, sometimes when you make a change in a

particular context, the change may not be visible immediately. If this happens, you must exit and re-

enter the context in order to ensure that the database is synchronized with the latest change.

none Removesroledesignationsfromthecontroller

manager SetstheroleoftheEnterasysWirelessControllertoManager

agent SetstheroleoftheEnterasysWirelessControllertoAgent