Specifications

Enterasys Wireless Controller Software CLI Reference Guide 9-7
Parameters
None
Examples
ThefollowingexampledisplaysthescangroupSouthBlock’ssettings.
EWC.enterasys.com:mitigator:scgroup:South-Block# show
Interval 100
dtime 300
radio both
channel current
type active
serial 0500006072051354 0500006072051427 0500006062051048 0500006062051040
9.4 friend
Thefriendcommandreferstocontextfriend,whichcontainscommandstoaddfriendlyAPs.The
friendcommandisaccessiblefromthemitigatorcontextoftheCLI.
9.4.1 frlist
UsethefrlistcommandtoaddaWirelessAPtothelistoffriendlyAPs.Usethenoformofthe
commandtodeleteaWirelessAPfromthelistoffriendlyAPs.
Syntax
frlist <mac> [ssid <string>] [channel <value>] [desc <string>]
no frlist <mac> [ssid <string>] [channel <value>] [desc <string>]
Parameters
Examples
ThefollowingexampleaddsaWirelessAPtothelistoffriendlyAPs.
EWC.enterasys.com:mitigator:friend# frlist 00:0E:8C:1E:A0:10 ssid CNL201-brg-AP-
wifi channel 1 desc friendly_ap
mac SpecifiesWirelessAPʹsMACaddress
ssid<string> SpecifiesWirelessAPʹsSSID
channel<value> SpecifiesWirelessAPʹscurrentoperatingchannel
desc<strin g> SpecifiesWirelessAPʹsbriefdescription
Note: After you have added a Wireless AP to the list of friendly APs, you must run the apply
command to implement the changes.