Specifications

9-6 mitigator Commands
9.3.2.6 channel
UsethechannelcommandtomodifytheChannelList—scanningonallchannelsoronthe
currentchannels.
Syntax
channel all|current
Parameters
Examples
Thefollowingexamplesetsthecurrentchanneltobescanned.
EWC.enterasys.com:mitigator:scgroup:South Block# channel current
9.3.2.7 start
Usethestartcommandtostartthescanning.
Syntax
start
Parameters
None
Examples
Thefollowingexamplestartsthescanning.
EWC.enterasys.com:mitigator:scgroup:South-Block# start
9.3.2.8 show
Usetheshowcommandtodisplaythescangroups’ssettings.
Syntax
show
Note: After you have run the type command, you must run the apply command to start the
scanning.
all Specifiesallchannelstobescanned
current Specifiesthecurrentchanneltobescanned
Note: After you have run the channel command, you must run the apply command to start the
scanning.
Note: After you have run the start command, you must run the apply command to start the
scanning.