Specifications

8-2 login Commands
Examples
Thefollowingexamplesavesloginconfigurationchanges.
EWC.enterasys.com:login# apply
8.2 auth
Theauthcommandmovesyouintothelogin:authcontext,whichcontainscommandsto
configuretheRADIUSserverforRADIUS‐basedlogin.
Thefollowingcommandsareavailableinthelogin:authcontext.
• server
• primary
• authset
• move
• radtest_login
8.2.1 server
UsetheservercommandtoselectaRADIUSserver.Theservercommandisavailablefromthe
login:authcontext.
Syntax
server (<#>|<name>)
no server (<#>|<name>)
Parameters
Examples
Thefollowingexampleselectsaradiusserverbyname
EWC.enterasys.com:login:auth# server rad2
8.2.2 primary
UsetheprimarycommandtosettheRADIUSserverastheprimaryserverforauthentication.Use
thenoformofthecommandtodisableit.Theprimarycommandisavailablefromthelogin:auth
context.
Syntax
primary <server_name>
no primary <server_name>
<#> SpecifiestheindexnumberoftheRADIUSservertobeused
<name> SpecifiesthenameoftheRADIUSservertobeused