Specifications

Enterasys Wireless Controller Software CLI Reference Guide 8-1
8
login Commands
Thelogincommandreferstologincontext,whichcontainscommandstoconfigurethelogin
authenticationmodes.ThelogincommandisaccessiblefromtherootcontextoftheCLI.
TheEnterasysWirelessControlleroffersfourloginauthenticationoptions:
•Localauthentication
•RADIUS‐basedauthentication
•Localauthenticationfirst,thenRADIUS‐baseda uthenti cation
•RADIUS‐basedauthenticationfirst,
thenlocalauthentication
Localauthenticationisenabledbydefault.IftheadministratorchoosestousetheRADIUS‐based
login,allpasswordpolicyenforcementisdelegatedtotheRADIUSserver,andtheaccount
managementfeaturesontheCLIaredisabled.
YoumusttesttheRADIUSserverconfigurationbeforeconfiguringauserprofile(User
IDand
Password),andsubmittingittotheRADIUSserver.
AfteryouhaveswitchedtoRADIUS‐basedlogin,youmustusetheRADIUScredentialstologon
theEnterasysWirelessController.
Thefollowingcommandsareavailableinthelogincontext.
• apply
• auth—Seeauthforcommandsinthelogin:authcontext.
•
auth‐order
• move
• show
8.1 apply
Usetheapplycommandtosaveloginconfigurationchanges.
Syntax
apply
Parameters
None
Note: All CLI commands cache changes. For this reason, sometimes when you make a change in a
particular context, the change may not be visible immediately. If this happens, you must exit and re-
enter the context in order to ensure that the database is synchronized with the latest change.