Specifications

Enterasys Wireless Controller Software CLI Reference Guide 7-7
7.2.5.7 retransmitinterval
Usetheretransmitintervalcommandtosettheamountoftimetheportwillwaitbeforeit
attemptstoretransmitoutgoingpackets
Syntax
retransmitinterval <1-65535>
Parameters
Examples
Thefollowingexamplesetstheretransmissiontimeintervaltofiveseconds
EWC.enterasys.com:ip:ospf:ospfinterface:0# retransmitinterval 5
7.2.5.8 status
UsethestatuscommandtoenableordisableOSPFadvertisingontheport.
Syntax
status (enable|disable)
Parameters
Examples
ThefollowingexampleenablesOSPFadvertisingontheport
EWC.enterasys.com:ip:ospf:ospfinterface:0# status enable
7.2.5.9 transmitdelay
Usethetransmitdelaycommandtosetthedelaytimebeforeinitiatingtransmission.
Syntax
transmitdelay <1-65535>
Parameters
Examples
Thefollowingexamplesetsthedelaytimefortransmissiontoonesecond
EWC.enterasys.com:ip:ospf:ospfinterface:0# transmitdelay 1
<1‐65535> Specifiesthetimeintervalinseconds
enable IndicatesthatOSPFadvertisingwillbeenabled
disable IndicatesthatOSPFadvertisingwillbedisabled
<1‐65535> Specifiestheamountoftimeinseconds