Specifications

7-4 ip Commands
7.2.4 status
UsethestatuscommandtoenableordisabletheOpenShortestPathFirst(OSPF)protocolonthe
EnterasysWirelessController.
Syntax
status (enable|disable)
Parameters
Examples
ThefollowingexampleenablesOSPFontheEnterasysWirelessController
EWC.enterasys.com:ip:ospf# status enable
7.2.5 ospfinterface
Theospfinterfacecommandmovesyoutothecontextip:ospf:ospfinterface,whichcontains
commandstoconfigureOpenShortestPathFirst(OSPF)protocoloptionsforaportofthe
EnterasysWirelessController.Theospfinterfacecomm andsupportsthespecifyingofanesaN
interface,whereNisanumberfrom0‐3.Forexample,the
commandospfinterface1movesyou
totheOSPFinterfaceesa1(ip:ospf:ospfinterface:1)configurationcontext.
Theospfinterfacecommandisaccessiblefromwithintheip:ospfcontext.
Thefollowingcommandsareavailableintheip:ospf:ospfinterfacecontext.
• <n>
• authkey
• authtype
• deadinterval
• hellointerval
• linkcost
• retransmitinterval
• status
• transmitdelay
7.2.5.1 <n>
Usethe<n>command,wherenisanumberfrom0‐3,tomovetotheip:ospf:ospfinterface:N
contextfortheconfigurationoftheOSPF esaNinterface.
The<n>commandisaccessiblefromwithintheip:ospf:ospfinterfacecontext.
Syntax
<n>
enable IndicatesthattheOSPFwillbeenabled
disable IndicatesthattheOSPFwillbedisabled