Specifications

Enterasys Wireless Controller Software CLI Reference Guide 7-3
Parameters
Examples
ThefollowingexamplesetstheOSPFareatoArea0.
EWC.enterasys.com:ip:ospf# area 0.0.0.0
7.2.2 areatype
UsetheareatypecommandtoselectthetypeofOpenShortestPathFirst(OSPF)protocolareato
beusedontheEnterasysWirelessController.
Syntax
areatype (default|stub|nssa)
Parameters
Examples
ThefollowingexamplesetstheOSPFareatypetoaStubarea
EWC.enterasys.com:ip:ospf# areatype stub
7.2.3 routerid
UsetherouteridcommandtoidentifytheIPaddressoftherouteroriginatingOpenShortestPath
First(OSPF)packets.
Syntax
routerid <IP Address>
Parameters
Examples
Thefollowingexamplesetstherouteridto1.1.1.1
EWC.enterasys.com:ip:ospf# routerid 1.1.1.1
<area_id> Specifiesaninte geroranIPaddressdefiningtheOSPFarea
default SelectstheNormalOSPFarea
stub SelectstheStubarea
nssa Selectsthe“NotSoStubby”area
<IPAddress> SpecifiestheIPaddressoftherouteroriginatingOSPFpackets