Specifications

Enterasys Wireless Controller Software CLI Reference Guide 6-1
6
l2ports Commands
ThissectiondescribescommandstoenableanddisableportsontheEnterasysWirelessController.
Thesecommandsarelocatedinthel2portscontextoftheCLI.L2portconfigurationisperformed
withinanamedtopologycontext.See“l2”onpage 21‐5forL2portconfigurat ioninformation.
Thefollowingcommandsareavailable
inthel2portscontext:
• esaN
• pc.N
• portN
• show
6.1 esaN
TheesaNcommandmovesyouintothecontextl2ports:esaN(wherevariableNreferstothe
physicaldataportnumber).Thiscontextcontainstheportcommandwhichenablesordisables
ports.Thiscommandisavailableonthefollowingcontrollers:CRBT8110,CRBT8210,C20,C2400,
andC5110.See“port”onpage 6‐2for
informationonenablinganddisablingaportinthiscontext.
6.2 pc.N
Thepc.Ncommandmovesyouintothecontextl2ports:pc.N(wherevariableNreferstothe
physicaldataportnumber).Thiscontextcontainstheportcommandwhichenablesordisables
ports.ThiscommandisavailableontheC20Ncontroller.See“port”onpage 6‐2forinformation
onenablinganddisablinga
portinthiscontext.
6.3 portN
TheportNcommandmovesyouintothecontextl2ports:portN(wherevariableNreferstothe
physicaldataportnumber).Thiscontextcontainstheportcommandwhichenablesordisables
Note: All CLI commands cache changes. For this reason, sometimes when you make a change in a
particular context, the change may not be visible immediately. If this happens, you must exit and re-
enter the context in order to ensure that the database is synchronized with the latest change.