Specifications

Enterasys Wireless Controller Software CLI Reference Guide 5-3
EWC.enterasys.com:checkpoint# show elaq
EWC.enterasys.com:checkpoint# show sicname
EWC.enterasys.com:checkpoint# show sicpwd
5.3 cpcert
Usethecpcertcommandtogenerateacert ificatetobesenttotheELAManagementStation.
Syntax
cpcert
Parameters
None
Examples
Thefollowingexamplegeneratesacertificate
EWC.enterasys.com:checkpoint# cpcert
5.4 elalogint
WhenaconnectionbetweentheEnterasysWirelessControllerandtheCheckPointgatewayis
established,thesystemwillwaitforacertainamountoftimebeforeitbeginstocreatelogs.
Usetheelaglogintcommandtosettheamountoftime(inmilliseconds)thesystemshouldwait
beforeattemptingtowrite
logmessages.
Syntax
elalogint <value>
Parameters
Examples
Thefollowingexamplesetsthelogintervaltimeto4ms.
EWC.enterasys.com:checkpoint# elalogint 4
5.5 elaport
UsetheelaportcommandtosettheEventloggingApplicationProgramInterface(API)portfor
CheckPointlogging.
Syntax
elaport <value>
<value> Thetimeinmillisecondsthesystemwillwaitbeforeloggingmessages.
Note: The cpip, sicname, and sicpwd values must also be set before the apply command can be
used.