Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-155
Examples
ThefollowingexampleenablestelnetaccesstotheWirelessAP.
EWC.enterasys.com:ap:0409920201204003# telnet
4.12.33 tunnel-mtu
Usethetunnel‐mtucommandtosetthestaticMTUvalue.Thetunnel‐mtucommandisaccessible
fromtheap
:<serial>contextoftheCLI.
Syntax
tunnel‐mtu <600‐1500>
Parameters
Usage
TheEnterasyswirelesssoftwareenforcesthestaticMTUsizeifitcannotdiscovertheMTUsize.
SettheMTUsizetoallowthesourcetoreducethepacketsizeandavoidtheneedtofragmentdata
packetsinthetunnel.
Examples
ThefollowingcommandsetstheMTUtunnelsizeto1300bytes..
EWC.enterasys.com:ap:0500008043050236# tunnel-mtu 1300
4.12.34 usedhcp
UsetheusedhcpcommandtoenableDHCP.Usethenoformofthecommandtostatically
configureaWirelessAP.Theusedhcpcommandisaccessiblefromtheap
:<serial>contextofthe
CLI.
Syntax
usedhcp
no usedhcp
Parameters
None
Examples
ThefollowingexampleenablesDHCPontheEnterasysWirelessController.
EWC.enterasys.com:ap:0122003880188015# usedhcp
<600‐1500> SpecifiesthestaticMTUsizeinbytes.Thedefaultis1500bytes.