Specifications

4-154 ap Commands
no bcast_disassoc
no vlanid
country United States
led-mode normal
wlan test both
lbs-status enabled
port-setting auto
tunnel-mtu 1500
ssh enabled
antennaleft No Antenna
antennamiddle No Antenna
antennaright No Antenna
4.12.31 ssh
UsethesshcommandtoenableordisableSSHforthespecifiedAP36xxAP.
Thesshcommandisaccessiblefromtheap
:<serial>contextoftheCLI.
Syntax
ssh enable | disable
Parameters
Usage
ThesshcommandappliesonlytoAP36xxAPs.Bydefault,SSHisenabled.IfyoudisableSSH,you
canstillretrieveAPtracesfromthecontrollerthroughSFTP.
Examples
ThefollowingcommanddisablesSSHonAP0500008043050236.
EWC.enterasys.com:ap:0500008043050236# ssh disable
4.12.32 telnet
UsethetelnetcommandtoenabletelnetaccesstotheWirelessAP.Usethenoformofthe
commandtodisableit.Thetelnetcommandisaccessiblefromthe ap
:<serial>contextoftheCLI.
Syntax
telnet
no telnet
Parameters
None
enable|disable EnablesordisablesSSHonthespecifiedAP36xxAP.