Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-151
Examples
EWC.enterasys.com:ap:0500008043050212# move aclist 4 + 3
4.12.23 name
UsethenamecommandtoassignorchangethenameoftheWirelessAP.Thenamecommandis
accessiblefromtheap
:<serial>contextoftheCLI.
Syntax
name <newname>
Parameters
Examples
ThefollowingexamplesetsthenameoftheWirelessAP.
EWC.enterasys.com:ap:0500008043050212# name HomeAP1
4.12.24 persistent
UsethepersistentcommandtoenableModePersistence.Usethe noformofthecommandto
disableModePersistence.Thepersistentcommandisaccessiblefromtheap
:<serial>contextofthe
CLI.
Syntax
persistent
no persistent
Parameters
None
Examples
ThefollowingexampleenablesModePersistence.
EWC.enterasys.com:ap:0500008043050212# persistent
ThefollowingexampledisablesModePersistence.
EWC.enterasys.com:ap:0500008043050212# no persistent
<newname> SpecifiesthenewnameoftheWirelessAP
Note: After you have run the persistent command, you must run the apply command to implement
the changes in mode persistence.