Specifications

4-148 ap Commands
Examples
ThefollowingexamplesetsthenameofthecountrytoUnitedStates
EWC.enterasys.com:ap:0500008043050212# country United States
4.12.17 desc
UsethedesccommandtochangethedescriptionoftheWirelessAP.Thedesccommandis
accessiblefromtheap
:<serial>contextoftheCLI.
Syntax
desc <new_description>
Parameters
Examples
ThefollowingexampleprovidesadescriptionforanWirelessAP
EWC.enterasys.com:ap:0500008043050212# desc This Access Point belongs to the Blue
Office
4.12.18 lbs-status
Usethelbs‐statuscommandtoenableordisablethecollectionofAeroScouttagsfortheAP.The
lbs‐statuscommandisaccessiblefromtheap
:<serial>contextoftheCLI.
Syntax
lbs-status enable | disable
Parameters
Examples
ThefollowingexampleenablesthecollectionofAeroScouttagsfortheAP.
EWC.enterasys.com:ap:0500008043050212# lbs-status enable
4.12.19 led-mode
Usetheled‐modecommandtoconfigurethebehavioroftheWirelessAP’sLEDs.Theled‐mode
commandisaccessiblefromtheap
:<serial>contextoftheCLI.
Syntax
led-mode {identify | normal | off | wds-signal}
<new_description> SpecifiesadescriptionoftheWirelessAP.
enable|disable EnableordisablethecollectionofAeroScouttagsfortheAP.