Specifications

4-144 ap Commands
4.12.10 apip
UsetheapipcommandwhenstaticallyconfiguringaWirelessAP.Inordertostaticallyconfigurea
WirelessAP,youmustfirstrunthenousedhcpcommand.Theapipcommandisaccessiblefrom
theap:<serial>contextoftheCLI.
Syntax
apip <IP Address> <netmask>
[no] apip <xxx.xxx.xxx.xxx> <xxx.xxx.xxx.xxx>
Parameters
Examples
EWC.enterasys.com:ap:7000001222222222 apip 10.205.3.131 255.255.255.0
4.12.11 bgway
UsethebgwaycommandwhenstaticallyconfiguringaWirelessAP.Inordertostatically
configureaWirelessAP,youmustfirstrunthenousedhcpcommand.Thebgwaycommandis
accessiblefromtheap:<serial>contextoftheCLI.
Syntax
bgway <xxx.xxx.xxx.xxx>
Parameters
Examples
EWC.enterasys.com:ap:7000001222222222 bgway 10.205.3.2
4.12.12 802_1x
The802_1xcommandrefersto802_1xcontextthatdescribescommandstoconfigure802.1x
authenticationforaWirelessAP.The802_1xcommandisaccessiblefromtheap:<serial>context
oftheCLI.
Thefollowingcommandsareavailableintheap
:<serial>:802_1xcontext:
• eap
• gen_certreq
• peap
<IPAddress> IPaddressoftheWirelessAP
<netmask> NetmaskoftheoftheWirelessAP
<xxx.xxx.xxx.xxx> Specifiesthedefaultgatewayofthenetwork.