Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-135
4.8.8 sshpasswd
Usethesshpasswdcommandtoresetthesshpassword.Usethenocommandtodisablethessh
password.Thesshpasswdcommandisaccessiblefromtheap:registrationcontextoftheCLI.
Syntax
sshpasswd <password>
no sshpasswd
Parameters
Examples
EWC.enterasys.com:ap:registration# sshpasswd mynewpassword
4.9 remove
UsetheremovecommandtoremoveaclientfromtheWirelessAP.Theremovecommandis
accessiblefromtheapcontextoftheCLI.
Syntax
remove client (mac <MAC> | mip <MIP>)
Parameters
Examples
ThefollowingexampleremovesaclientfromtheWirelessAPbyspecifyingitsMACaddress
EWC.enterasys.com:ap# remove client mac 00:12:F0:81:A4:62
ThefollowingexampleremovesaclientfromtheWirelessAPbyspecifyingitsIPaddress
EWC.enterasys.com:ap# remove client mip 172.28.209.251
password Specifiesthesshpassword
Note: The password must be between 5 and 30 alphanumeric characters.
mac IndicatesthataMACaddresswillbespecified
<MAC> SpecifiestheMACaddress
mip IndicatesthatanIPaddresswillbespecified
<MIP> SpecifiestheIPaddress