Specifications

4-134 ap Commands
4.8.6 passwd
UsethepasswdcommandtoassignapasswordfortelnetaccessibleWirelessAPs.Thepasswd
commandisaccessiblefromtheap:registrationcontextoftheCLI.
Formoreinformation,see“telnet”onpage 4‐154.
Syntax
passwd <telnet password>
Parameters
Examples
Thefollowingexampleassignspassword‘thisistelnetpa ssword’.
EWC.enterasys.com:ap:registration# passwd thisistelnetpassword
4.8.7 security
UsethesecuritycommandtoallowonlyapprovedWirelessAPstoconnecttotheEnterasys
WirelessController.UsethenoformofthecommandtoallowallWirelessAPstoconnecttoit.
Thesecuritycommandisaccessiblefromtheap:registrationcontextoftheCLI.
Syntax
security
no security
Parameters
None
Examples
ThefollowingexampleallowsonlyapprovedWirelessAPstoconnecttotheEnterasysWireless
Controller
EWC.enterasys.com:ap:registration# security
Note: The telnet password must be between 5 and 30 alphanumeric characters.
telnetpassword Specifiesthetelnetpassword.
Note: Wireless APs without connection approval are put into a pending state, and an administrator
has to manually approve those connections.