Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-129
Usage
Afteryouchangethenameoftheloadgroupandapplythechange(withtheapplycommand),
theap:load‐groups:<named‐load‐group>contextretainsthepreviousnameoftheloadgroup.To
changetheap:load‐groups:<named‐load‐group>contexttothenewnameoftheloadgroup,you
exitthecontext
andthenentertheap:load‐groups:<named‐load‐group>contextusingthenew
name.
Examples
Thefollowingexamplechangesthenameofloadgroup1tolg_lab.
EWC.enterasys.com:ap:load-groups:loadgroup1# name lg_lab
EWC.enterasys.com:ap:load-groups:loadgroup1# apply
EWC.enterasys.com:ap:load-groups:loadgroup1# exit
EWC.enterasys.com:ap:load-groups# help
Available commands are:
create Create load group
delete Delete load group
end Return to the base mode
exit Return to the previous mode if not in the base mode
lg_lab Configure details for load group lg_lab
logout Exit the shell
show
EWC.enterasys.com:ap:load-groups# lg_lab
EWC.enterasys.com:ap:load-groups:lg_lab#
4.6.3.7 radio-load
Usethiscommandtoconfigurethemaximumnumberofclientsforeachradiowhentheradio
loadcontrolfeatureisenabled.The
radio‐loadcommandisaccessiblefromtheap:load‐
groups:<named‐load‐group>
contextoftheCLI,fortheradiotypeofloadgroup.
Syntax
radio-load <radio1 | radio2> <max-clients>
Parameters
Examples
Thisexampleenablesloadcontrolperradioforloadgroupnamedradiogroup1,thenspecifiesthe
maximumnumberofclientsforradio1andradio2.
EWC.enterasys.com:ap:load-groups:radiogroup1# loadcontrol enable
EWC.enterasys.com:ap:load-groups:radiogroup1# radio-load radio1 40
EWC.enterasys.com:ap:load-groups:radiogroup1# radio-load radio2 50
radio1|radio2 Specifiestheradiobeingconfigured.
max‐clients Specifiesthemaximumnumberofclientsforthespecifiedradio.Canbe
anintegerbetween5and60.