Specifications

4-128 ap Commands
4.6.3.4 bandpreference
UsethiscommandtoenableordisablethebandpreferencefeatureforallAPsinaradiotypeload
group.The
bandpreferencecommandisaccessiblefromtheap:load‐groups:<named‐load‐group>
contextoftheCLI,fortheradiotypeofloadgroup.
Syntax
bandpreference <enable | disable>
Parameters
Examples
Thisexampleenablesbandpreferencesteeringfortheradioloadgroupnamedradiogroup1.
EWC.enterasys.com:ap:load-groups:radiogroup1# bandpreference enable
4.6.3.5 loadcontrol
UsethiscommandtoenableordisabletheloadcontrolperradiofeatureforallAPsinaradiotype
loadgroup.The
loadcontrolcommandisaccessiblefromtheap:load‐groups:<named‐load‐group>
contextoftheCLI,fortheradiotypeofloadgroup.
Syntax
loadcontrol <enable | disable>
Parameters
Examples
Thisexampleenableslocacontrolperradiofortheradioloadgroupnamedradiogroup1.
EWC.enterasys.com:ap:load-groups:radiogroup1# loadcontrol enable
4.6.3.6 name
Usethenamecommandtochangethenameofaloadgrou p.Thenamecommandisaccessible
fromtheap:load‐groups:<named‐load‐group>contextoftheCLI,forbothtypesofloadgroups.
Syntax
name <load group name>
Parameters
enable Enableband preferencesteering.
disable Disablebandpreferencesteering.Thedefaultconditionisdisabled.
enable Enableloadcontrolperradio.Usetheradio‐loadcommandto
configurethemaximumnumberofclientsperradiowhenloadcontrol
isenabled.
disable Disableloadcontrolperradio.Thedefaultconditionisdisabled.When
disabled,amaximumof121clientsisallowedforeachradio.
loadgroupname Thenewnameoftheloadgroup