Specifications

4-126 ap Commands
4.6.3 <named-load-group>
The<named‐load‐group>command,where<named‐load‐group>referstothenameofagiven
loadgroup,movesyouintotheap:load‐groups:<named‐load‐group>context,whichcontains
commandstoconfigurethesettingsofthespecifiedindividualloadgroup.
Thefollowingcommandsareavailableintheap:load‐groups:<named‐load‐group>
context.The
commandsavailabletoyoudependsonthetypeofloadgroupyouareconfiguring,eitherradioor
client(seecreateonpage4‐124).
• assign‐ap
• assign‐radio
• assign‐wlan
• bandpreference
• loadcontrol
• name
• radio‐load
• show
4.6.3.1 assign-ap
UsethiscommenttoaddorremovetheAPradiosfromthenamedradiotypeloadgroup.The
assign‐apcommandisaccessiblefromtheap:load‐groups:<named‐load‐group>contextoftheCLI,for
loadgroupsoftyperadio.
Syntax
assign-radio {add | delete} <ap-name>
Parameters
Usage
IfthespecifiedAPisalreadyassignedtoaloadgroup,anewassignmentwillremovetheoriginal
radioassignment.Youarepromptedtoconfirmthenewassignment.
Examples
ThisexampleaddsaWirelessAPnamedAP3610_2tonamedradioloadgroup“radiogroup1.”
EWC.enterasys.com:ap:load-groups:radiogroup1# assign-ap add AP3610_2
4.6.3.2 assign-radio
Usetheassign‐radiocommandtoassignAPradiostothenamedclientloadgroup.Youcanalso
usethiscommandtounassigntheAPradiosfromthenamedclientloadgroup.The
assign‐radio
commandisaccessiblefromtheap
:load‐groups:<named‐load‐group>contextoftheCLI,forgroups
oftypeclient.
Syntax
assign-radio (add|delete) <ap-name> (radio1|radio2|both)
add|delete AddorremovethespecifiedAPradiofromtheloadgroup.
ap‐name SpecifiestheAP.