Specifications

4-122 ap Commands
4.3.6.10 telnet
UsethetelnetcommandtoenabletelnetaccesstotheWirelessAP.Usethenoformofthe
commandtodisableit.Thetelnetcommandisaccessiblefromthe ap:defaults:stdcontextofthe
CLI.
Syntax
telnet
no telnet
Parameters
None
Examples
ThefollowingexampleenablestelnetaccesstotheWirelessAP
EWC.enterasys.com:ap:defaults:std# telnet
4.4 export_drm
Usetheexport_drmcommandtoexportWirelessAPchannelandmaxim umpowervaluestoan
FTPserver.Theexport_drmcommandisaccessiblefromtheapcontextoftheCLI.
Syntax
export_drm <server> <user> <dir> <file_name>
Parameters
Examples
ThefollowingexampleexportstheDRMsettingstoaFTPserver.
EWC.enterasys.com:ap# export_drm 192.168.4.211 test / drm_202.txt
Please input password:
Attempting to upload file...
SUCCESS: Upload completed.
Note: After you have run the telnet command, you must run the apply command to implement the
change.
<server> TheIPaddressoftheFTPserveronwhichtheWirelessAPchannel
andmaximumpowervaluesaretobeuploaded.
<user> TheusernametoaccesstheFTPserver
<dir> ThedirectoryontheFTPserver,wherethefilecontainingthe
WirelessAPchannelandmaximumpowervaluesaretobestored.
<file_name> The
nameofthefilethatcontainstheWirelessAPchanneland
maximumpowervalues.