Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-121
Examples
ThefollowingexamplesetstheprotectiontypetoCTS
EWC.enterasys.com:ap:defaults:std:radio2# ptype cts only
4.3.6.9.20 rts
UsethertscommandtospecifythesizeoftheRequesttoSend(RTS)threshold.Thertscommand
isaccessiblefromtheap:defaults:std:radio2contextoftheCLI.
Syntax
rts <value>
Parameters
Examples
ThefollowingexamplesetstheRTSpacket sizeto256
EWC.enterasys.com:ap:defaults:std:radio2# rts 256
4.3.6.9.21 tx_max_power
Usethetx_max_powercommandtosetthemaximumTxpowerlevel.Thetx_max_power
commandisaccessiblefromtheap:defaults:std:radio2contextoftheCLI.
Syntax
tx_max_power <value>
Parameters
Examples
ThefollowingexamplesetsthemaximumTxpowerlevelto18dBm.
EWC.enterasys.com:ap:defaults:std:radio2# tx_max_power 18
Note: The acceptable value for rts value is from 1 to 2346.
<value> SpecifiestheRequesttoSendpacketsizethreshold.
Note: The tx_max_power is a maximum level when ATPC is enabled, and a fixed level when it
ATPC is disabled.
<value> SpecifiesthemaximumTxpowerlevel.