Specifications

4-118 ap Commands
Examples
ThefollowingexamplesetsthemaximumdistancebetweenAPsto1500meters.
EWC.enterasys.com:ap:defaults:std:radio2# max-distance 1500
4.3.6.9.13 maxoprate
Usethemaxopratecommandtosetthemaximumoperationalrate.Themaxoprateisaccessible
fromtheap:defaults:std:radio2contextoftheCLI.
Syntax
maxoprate <value>
Parameters
Examples
Thefollowingexamplesetsthemaximumoperationalrateto24Mbps
EWC.enterasys.com:ap:defaults:std:radio2# maxoprate 24
4.3.6.9.14 minbrate
Usetheminbratecommandtoconfiguretheminimumbasicrate.Theminbratecommandis
accessiblefromtheap:defaults:std:radio2contextoftheCLI.
Syntax
minbrate <value>
Parameters
Examples
Thefollowingexampleconfigurestheminimumbasicrateto6Mbps
EWC.enterasys.com:ap:defaults:std:radio2# minbrate 6
Note: Available operational rate values (in Mbps) for Radio 2 are: 6, 9, 12, 18, 24, 36, 48, and 54.
<value> SpecifiesthemaximumoperationalratevalueinMpbs
Note: The acceptable minbrate values are 6, 12 and 24 Mbps.
<value> SpecifiestheminimumbasicratevalueinMbps