Specifications

4-112 ap Commands
4.3.6.9.2 atpc
UsetheatpccommandtoenableAutoTxPowerCtrl(ATPC).Usethenoformofthecommandto
disablethefeature.Theatpccommandisaccessiblefromtheap
:defaults:std:radio2contextofthe
CLI.
Syntax
atpc
no atpc [maintain_power]
Parameters
Examples
ThefollowingexampledisablesatpconRadio2.
EWC.enterasys.com:ap:defaults:std:radio2# no atpc maintain_power
4.3.6.9.3 beaconp
Usethebeaconpcommandtosettimeunitsbetweenbeacontransmissions.Thebeaconp
commandisaccessiblefromtheap
:defaults:std:radio2contextoftheCLI.
Syntax
beaconp <value>
Parameters
Examples
Thefollowingexamplesetsthetimebetweensuccessivebeaconsto70msonRadio2.
EWC.enterasys.com:ap:defaults:std:radio2# beaconp 70
4.3.6.9.4 dcs
Thedcscommandreferstothedcscontext,whichcontainscommandstoconfiguretheDynamic
ChannelSelection(DCS)feature.Thedcscommandisaccessiblefromtheap
:defaults:std:radio2
contextoftheCLI.
Thefollowingcommandsareavailableintheap
:defaults:std:radio2:dcscontext:
channel_plan
mode
[maintain_power] WhenyoudisableATPC,youcan electtomaintainusingthe
currentTxpowersettingATPChadestablished.
<value> Specifiesthenumberoftimeunits(milliseconds)betweenbeacon
transmissions.Theacceptablerangeforbeaconpvalueisfrom50to
1000milliseconds.
Note: Commands entered in the dcs context do not need to be followed by "apply" in order for them
to take effect.