Specifications

4-110 ap Commands
Parameters
Examples
Thefollowingexampleenablesonly802.11amodeofRadio1.
EWC.enterasys.com:ap:defaults:std:radio1# mode a
4.3.6.8.16 rts
UsethertscommandtospecifythesizeoftheRequesttoSend(RTS)threshold.Thertscommand
isaccessiblefromtheap:defaults:std:radio1contextoftheCLI
Syntax
rts <value>
Parameters
Examples
ThefollowingexamplesetstheRTSpacket sizeto256
EWC.enterasys.com:ap:defaults:std:radio1# rts 256
4.3.6.8.17 tx_max_power
Usethetx_max_powercommandtosetthemaximumTxpowerlevel.Thetx_max_power
commandisaccessiblefromtheap:defaults:std:radio1contextoftheCLI.
Syntax
tx_max_power <value>
Parameters
Examples
ThefollowingexamplesetsthemaximumTxpowerlevelto18dBm.
EWC.enterasys.com:ap:defaults:std:radio1# tx_max_power 18
aEnable802.11amodeofRadio1.
Note: The acceptable value for rts value is from 1 to 2346.
<value> SpecifiestheRequesttoSendpacketsizethreshold.
Note: The tx_max_power is a maximum level when ATPC is enabled, and a fixed level when it
ATPC is disabled.
<value> SpecifiesthemaximumTxpowerlevel.