Specifications

4-102 ap Commands
Parameters
Examples
EWC.enterasys.com:ap:defaults:std:radio1# admin-mode on
4.3.6.8.2 atpc
UsetheatpccommandtoenableAutoTxPowerCtrl(ATPC).Usethenoformofthecommandto
disablethefeature.Theatpccommandisaccessiblefromtheap
:defaults:std:radio1contextofthe
CLI.
Syntax
atpc
no atpc
Parameters
None
Examples
ThefollowingexampledisablesATPConRadio1.
EWC.enterasys.com:ap:defaults:std:radio1# no atpc
4.3.6.8.3 beaconp
Usethebeaconpcommandtosettimeunitsbetweenbeacontransmissions.Thebeaconp
commandisaccessiblefromtheap
:defaults:std:radio1contextoftheCLI.
Syntax
beaconp <value>
Parameters
Examples
Thefollowingexamplesetsthetimebetweensuccessivebeaconsto70msonRadio1.
EWC.enterasys.com:ap:defaults:std:radio1# beaconp 70
off Cleartheadministrativestatus.
on Settheadministrativestatus.Onisthe default.
<value> Specifiesthenumberoftimeunits(milliseconds)betweenbeacon
transmissions.Theacceptablerangeforbeaconpvalueisfrom50to
1000milliseconds.