Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-95
Parameters
Examples
ThefollowingexamplesetstheRTSpacket sizeto256
EWC.enterasys.com:ap:defaults:dualband:radio2# rts 256
4.3.4.9.20 tx_adjust_power
Usethetx_adjust_powercommandtospecifyanoffsettotheTxpowerlevel,whichisusedto
adjusttheATPCpowerlevelsfromthecalculatedvalue.Thetx_adjust_powercommandis
accessiblefromtheap:defaults:dualband:radio2contextoftheCLI.
Syntax
tx_adjust_power <value>
Parameters
Examples
Thefollowingexamplespecifies theTxpowerlevelto0dBm.
EWC.enterasys.com:ap:defaults:dualband:radio2# tx_adjust_power 0
4.3.4.9.21 tx_max_power
Usethetx_max_powercommandtosetthemaximumTxpowerlevel.Thetx_max_power
commandisaccessiblefromtheap:defaults:dualband:radio2contextoftheCLI.
Syntax
tx_max_power <value>
Parameters
Note: The acceptable value for rts value is from 1 to 2346.
<value> SpecifiestheRequesttoSendpacketsizethreshold.
Note: The tx_adjust_power command is available only when Auto Tx Power Ctrl (ATPC) is
enabled.
<value> SpecifiesthevalueindBm
Note: The tx_max_power is a maximum level when ATPC is enabled, and a fixed level when it
ATPC is disabled.
<value> SpecifiesthemaximumTxpowerlevel.