Specifications

4-92 ap Commands
Parameters
Examples
Thefollowingexamplesetsthemaximumoperationalrateto24Mbps
EWC.enterasys.com:ap:defaults:dualband:radio2# maxoprate 24
4.3.4.9.13 minbrate
Usetheminbratecommandtoconfiguretheminimumbasicrate.Theminbratecommandis
accessiblefromtheap:defaults:dualband:radio2contextoftheCLI.
Syntax
minbrate <value>
Parameters
Examples
Thefollowingexampleconfigurestheminimumbasicrateto6Mbps
EWC.enterasys.com:ap:defaults:dualband:radio2# minbrate 6
4.3.4.9.14 mode
UsethemodecommandtosettheradiooptionsforRadio2.Usethenoformofthecommandto
disableRadio2.Themodecommandisaccessiblefromtheap:defaults:dualband:radio2context
oftheCLI.
Syntax
mode <a|b|g|bg>
Parameters
<value> SpecifiesthemaximumoperationalratevalueinMpbs
<value> SpecifiestheminimumbasicratevalueinMbps.Thevalidminbrate
valuesare6,12and24Mbps.
Note: Depending on the radio mode you select, some of the radio settings may not be available for
configuration.
aEnablesthe802.11a‐onlymodeofRadio2.
bEnablesthe802.11b‐onlymodeofRadio2.Ifenabled,theAPwilluse
only11b(CCK)rateswithallassociatedclients.
gEnablesthe802.11g‐onlymodeofRadio2.TheAPwilluse11g ‐only
(OFDM)rateswithallassociatedclients.
bg Enablesboth
the802.11gmodeandthe802.11bmodeofRadio2.If
enabled,theAPwilluse11b(CCK)and11g‐specific(OFDM)rates
withalloftheassociatedclients.