Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-81
4.3.4.8.14 minbrate
Usetheminbratecommandtoconfiguretheminimumbasicrate.Theminbratecommandis
accessiblefromtheap
:defaults:dualband:radio1contextoftheCLI.
Syntax
minbrate <value>
Parameters
Examples
Thefollowingexampleconfigurestheminimumbasicrateto6Mbps
EWC.enterasys.com:ap:defaults:dualband:radio1# minbrate 6
4.3.4.8.15 mode
UsethemodecommandtosettheradiooptionsforRadio1.Usethenoformofthecommandto
disableRadio1.Themodecommandisaccessiblefromtheap
:defaults:dualband:radio1contextof
theCLI.
Syntax
mode <a|b|g|bg>
Parameters
Examples
Thefollowingexampleenablesonly802.11amodeofRadio1.
EWC.enterasys.com:ap:defaults:dualband:radio1# mode a
<value> SpecifiestheminimumbasicratevalueinMbps.Thevalidminbrate
valuesare6,12and24Mbps.
Note: Depending on the radio mode you select, some of the radio settings may not be available for
configuration.
aEnables802.11amodeofRadio1.
bEnablesthe802.11b‐onlymodeofRadio1.Ifenabled,theAPwilluse
only11b(CCK)rateswithallassociatedclients
gEnablesthe802.11g‐onlymodeofRadio1.TheAPwilluse11g ‐only
(OFDM)rateswithallassociatedclients.
bg Enablesboththe802.11g
modeandthe802.11bmodeofRadio1.If
enabled,theAPwilluse11b(CCK)and11g‐specific(OFDM)rates
withalloftheassociatedclients.