Specifications

4-80 ap Commands
Parameters
Examples
ThefollowingexamplesetsthemaximumdistancebetweenAPsto1500meters.
EWC.enterasys.com:ap:defaults:dualband:radio1# max-distance 1500
4.3.4.8.12 maxbrate
Usethemaxbratecommandtoconfigurethemaximumbasicrate.Themaxbratecommandis
accessiblefromtheap
:defaults:dualband:radio1contextoftheCLI.
Syntax
maxbrate <value>
Parameters
Examples
Thefollowingexampleconfiguresthemaximumbasicrateto24Mbps
EWC.enterasys.com:ap:defaults:dualband:radio1# maxbrate 24
4.3.4.8.13 maxoprate
Usethemaxopratecommandtosetthemaximumoperationalrate.Themaxoprateisaccessible
fromtheap
:defaults:dualband:radio1contextoftheCLI.
Syntax
maxoprate <value>
Parameters
Examples
Thefollowingexamplesetsthemaximumoperationalrateto24Mbps
EWC.enterasys.com:ap:defaults:dualband:radio1# maxoprate 24
<value> SpecifiesthemaximumdistancebetweenAPsinmeters.Thedefaultis
100meters.Youcanenteravaluefrom100to15000meters.
Note: The acceptable minbrate values are 6, 12 and 24 Mbps. The maximum basic rate choices
adjust automatically to be higher or equal to the minimum basic rate.
<value> SpecifiesthemaximumbasicratevalueinMbps
Note: Available operational rate values (in Mbps) for Radio 1 are: 6, 9, 12, 18, 24, 36, 48, and 54.
<value> SpecifiesthemaximumoperationalratevalueinMpbs