Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-79
Examples
Thefollowingexamplesetsthefragmentationthreshol dto1500
EWC.enterasys.com:ap:defaults:dualband:radio1# frag 1500
4.3.4.8.10 hwretries
Usethehwretriescommandtosetthenumberofretriesforbackgroundtransmissionqueue,best
efforttransmissionqueue,videotransmissionqueue,voicetransmissionqueue,andturbovoice
transmissionqueue.Thehwretriescommandisaccessiblefromtheap
:defaults:dualband:radio1
contextoftheCLI.
Syntax
hwretries (BK|BE|VI|VO|TVO) <value>
Parameters
Examples
Thefollowingexamplesetstheretryvaluesforthebackgroundtransmissionqueue,besteffort
transmissionqueue,videotransmissionqueue,voicetransmissionqueue,andtheturbovoice
transmissionqueueas1,2,3,4,5respectively.
EWC.enterasys.com:ap:defaults:dualband:radio1# hwretries 12345
4.3.4.8.11 max-distance
Usethemax‐distancecommandtosetthemaximumlinkdistance, inmeters,betweenAPsthat
participateinaWDS.Thisvalueensuresthattheacknowledgementofcommunicationbetween
APsdoesnotexceedthetimeoutvaluepredefinedbythe802.11standard.
Ifthelinkdistance
betweenAPsisgreaterthanthedefaultvalueof100meters,configurethemaximumdistanceup
to15,000meterssothatthesoftwareincreasesthetimeoutvalueproportionallywiththedistance
betweenAPs.Themax‐distancecommandisaccessiblefromtheap
:defaults:dualband:radio1
contextoftheCLI.
Syntax
max-distance <value>
BK SpecifiesthenumberofretriesfortheBackgroundtransmissionqueue.
BE SpecifiesthenumberofretriesfortheBestEfforttransmissionqueue.
VI SpecifiesthenumberofretriesfortheVideotransmissionqueue.
VO SpecifiesthenumberofretriesfortheVoicetransmissionqueue.
TVO SpecifiesthenumberofretriesfortheTurboVoicetransmissionqueue.
Note: You can set each parameter — background transmission queue, best effort transmission
queue, video transmission queue, voice transmission queue and turbo voice transmission queue —
to any value from 0 to 10 (0 means adaptive).
Note: Do not change the default setting for any radio that is not participating in a Mesh or WDS.