Specifications

4-78 ap Commands
Parameters
Examples
ThefollowingexampleassignsthenametesttothegroupofAPsthatcooperateinmanagingRF
channelsandtransmissionpowerlevels.
EWC.enterasys.com:ap:defaults:dualband:radio1# domain domain_test
4.3.4.8.8 dtim
UsethedtimcommandtosettheDeliveryTrafficIndicationMessage(DTIM)period.Thedtim
commandisaccessiblefromtheap
:defaults:dualband:radio1contextoftheCLI.
Syntax
dtim <value>
Parameters
Examples
ThefollowingexamplesetstheDeliveryTrafficIndicationMessageperiodto2beacons.
EWC.enterasys.com:ap:defaults:dualband:radio1# dtim 2
4.3.4.8.9 frag
Usethefragcommandtosetthefragmentationthreshold,whichisthemaximumsizeofapacket
ordataunitthatcanbedelivered.Anydataabovethisthresholdwillbefragmentedintopackets
thatarelessthanorequaltothislimit.Thefragcommandisaccessiblefromthe
ap
:defaults:dualband:radio1contextoftheCLI.
Syntax
frag <value>
Parameters
Note: The maximum length of the domain string is 15 characters.
<domain_name> SpecifiesthegroupnameofAPsthatcooperatein
managingRFchannels.
Note: The acceptable range for the dtim value is from 1 to 255 beacon intervals.
<value> SpecifiestheDTIMperiodinbeacons
<value> Specifiesthemaximumsize,measuredinbytes,ofanypacket
fragmentfordelivery.