Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-75
4.3.4.8.4.3 noise_threshold
Usethenoise_thresholdcommandtosettheDCSnoisethreshold.Thenoise_threshold
commandisaccessiblefromtheap
:defaults:dualband:radio1:dcscontextoftheCLI.
Syntax
noise_threshold <thrshold>
Parameters
Examples
Thefollowingexamplesetsthenoisethresholdto‐45dBm.
EWC.enterasys.com:ap:defaults:dualband:radio1:dcs# noise_threshold -45
4.3.4.8.4.4 occupancy_threshold
Usetheoccupancy_thresholdcommandtosettheDCSChannelOccupancyThreshold.The
occupancy_thresholdcommandisaccessiblefromtheap
:defaults:dualband:radio1:dcscontextof
theCLI.
Syntax
occupancy_threshold <thrshold>
Parameters
Examples
ThefollowingexamplesetstheDCSChannelOccupancyThresholdto10percent.
EWC.enterasys.com:ap:defaults:dualband:radio1:dcs# occupancy_threshold 10
4.3.4.8.4.5 radio_channels
Usetheradio_channelscommandtodisplaythelistofavailableradiochannelsforautochannel
selection(ACS).Theradio_channelscommandisaccessiblefromthe
ap
:defaults:dualband:radio1:dcscontextoftheCLI.
Syntax
radio_channels
Parameters
None
<thrshold> SpecifiestheDCSnoisethresholdindBm.TheDCSnoise
thresholdmustbeinthe‐95to‐50range.ACSwillscanfor
anewoperatingchannelfortheWirelessAPifthe
thresholdisexceeded.
thrshold SpecifiestheDCSOccupancyThresholdasapercentage.TheDCS
OccupancyThresholdmustbeinthe10to100range.