Specifications

4-68 ap Commands
• country
• led‐mode
• lldp
• persistent
• poll_timeout
• radio1—Seeradio1forcommandsintheap:defaults:dualband:radio1context.
• radio2—Seeradio2forcommandsintheap:defaults:dualband:radio2context.
• telnet
4.3.4.1 bcast_disassoc
Usethebcast_disassoccommandtoenabletheWirelessAPtousebroadcastdisassociationwhen
disconnectingallclients,insteadofdisassociatingeachclientonebyone.Usethenoformofthe
commandtodisablethefeature.Thebcast_disassoccommandisaccessiblefromthe
ap
:defaults:dualbandcontextoftheCLI.
Syntax
bcast_disassoc
no bcast_disassoc
Parameters
None
Examples
ThefollowingdisassociatesclientsfromtheWirelessAP
EWC.enterasys.com:ap:defaults:dualband# bcast_disassoc
4.3.4.2 client_session
Usetheclient_sessioncommandtoenableuserstomaintainclientsessionsintheeventofapoll
failure.Usethenoformofthecommandtodisablethefeature.Theclient_sessioncommandis
accessiblefromtheap
:defaults:dualbandcontextoftheCLI.
Syntax
client_session
no client_session
Parameters
None
Examples
Thefollowingexampleenablesuserclientsessions
EWC.enterasys.com:ap:defaults:dualband# client_session
Note: After you have run the bcast_disassoc command, you must run the apply command to
implement the change in broadcast disassociation.