Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-67
Parameters
None
Examples
ThefollowingexampleenablestelnetaccesstotheWirelessAP
EWC.enterasys.com:ap:defaults:4102# telnet
4.3.3 assign
Theassigncommandreferstocontextassign,whichcontainsthewlans‐listcommand.The
assigncommandisaccessiblefromtheap:defaultscontextoftheCLI.
4.3.3.1 wlans-list
Usethewlans‐listcommandtoassigntheRadio1andRadio2totheWLANS.Usetheno
commandtodisabletheradiosfromtheWLANS.Thewlans‐listcommandisaccessiblefromthe
ap:defaults:assigncontextoftheCLI.
Syntax
wlans-list <wlans-name> <radio1|radio2>
no vnslist
Parameters
Examples
ThefollowingexampleassignsRadio1toCNL‐209WLANS.
EWC.enterasys.com:ap:defaults:assign# wlans-list CNL-209 radio1
4.3.4 dualband
UsethedualbandcommandtoconfigureWirelessAPdefaultconfigurationforWirelessOutdoor
APs.Usenoformofthecommandtodisablethisfeature.Thedualbandcommandisavailable
fromtheap:defaultscontextoftheCLI.
Thefollowingcommandsareavailableintheap
:defaults:dualbandcontext:
• bcast_disassoc
• client_session
Note: After you have run the telnet command, you must run the apply command to implement the
change.
<wlans‐name> ThenameoftheWLANS
<radio1> 5GHzradio
<radio2> 2.4GHzradio
Note: After you have run the wlans-list command, you must run the apply command to implement
the changes in radio assignments.