Specifications

4-66 ap Commands
4.3.2.9.20 rts
UsethertscommandtospecifythesizeoftheRequesttoSend(RTS)threshold.Thertscommand
isaccessiblefromtheap:defaults:4102:radio2contextoftheCLI
Syntax
rts <value>
Parameters
Examples
ThefollowingexamplesetstheRTSpacket sizeto256
EWC.enterasys.com:ap:defaults:4102:radio2# rts 256
4.3.2.9.21 tx_max_power
Usethetx_max_powercommandtosetthemaximumTxpowerlevel.Thetx_max_power
commandisaccessiblefromtheap:defaults:4102:radio2contextoftheCLI.
Syntax
tx_max_power <value>
Parameters
Examples
ThefollowingexamplesetsthemaximumTxpowerlevelto18dBm.
EWC.enterasys.com:ap:defaults:4102:radio2# tx_max_power 18
4.3.2.10 telnet
UsethetelnetcommandtoenabletelnetaccesstotheWirelessAP.Usethenoformofthe
commandtodisableit.Thetelnetcommandisaccessiblefromtheap:defaults:4102contextofthe
CLI
Syntax
telnet
no telnet
Note: The acceptable value for rts value is from 1 to 2346.
<value> SpecifiestheRequesttoSendpacketsizethreshold.
Note: The tx_max_power is a maximum level when ATPC is enabled, and a fixed level when it
ATPC is disabled.
<value> SpecifiesthemaximumTxpowerlevel.