Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-55
4.3.2.8.18 tx_max_power
Usethetx_max_powercommandtosetthemaximumTxpowerlevel.Thetx_max_power
commandisaccessiblefromtheap:defaults:4102:radio1contextoftheCLI.
Syntax
tx_max_power <value>
Parameters
Examples
ThefollowingexamplesetsthemaximumTxpowerlevelto18dBm.
EWC.enterasys.com:ap:defaults:4102:radio1# tx_max_power 18
4.3.2.8.19 tx_min_power
Usethetx_min_powercommandtospecifytheminimumTxpowerlevel.Thetx_min_power 
commandisaccessiblefromtheap:defaults:4102:radio1contextoftheCLI.
Syntax
tx_min_power <value>
Parameters
Examples
Thefollowingexamplespecifies theminimumTxpowerlevelto8dBm.
EWC.enterasys.com:ap:defaults:4102:radio1# tx_min_power 8
4.3.2.9 radio2
Theradio2commandreferstotheradio2context,whichcontainscommandstoconfigureRadio2
oftheWirelessAP.Theradio2commandisaccessiblefromtheap
:defaults:4102contextoftheCLI.
Thefollowingcommandsareavailableintheap
:defaults:4102:radio2context:
• admin‐mode
• atpc
• beaconp
• dcs—Seedcsforcommandsintheap:defaults:4102:radio2:dcscontext.
Note: The tx_max_power is a maximum level when ATPC is enabled, and a fixed level when it
ATPC is disabled.
<value> SpecifiesthemaximumTxpowerlevel.
Note: The tx_min_power is available only when Auto Tx Power Ctrl (ATPC) is enabled.
value SpecifiesthevalueindBm