Specifications

Enterasys Wireless Controller Software CLI Reference Guide 4-53
betweenAPs.Themax‐distancecommandisaccessiblefromtheap:defaults:4102:radio1context
oftheCLI.
Syntax
max-distance <value>
Parameters
Examples
ThefollowingexamplesetsthemaximumdistancebetweenAPsto1500meters.
EWC.enterasys.com:ap:defaults:4102:radio1# max-distance 1500
4.3.2.8.14 minbrate
Usetheminbratecommandtoconfiguretheminimumbasicrate.Theminbratecommandis
accessiblefromtheap:defaults:4102:radio1contextoftheCLI.
Syntax
minbrate <value>
Parameters
Examples
Thefollowingexampleconfigurestheminimumbasicrateto6Mbps
EWC.enterasys.com:ap:defaults:4102:radio1# minbrate 6
4.3.2.8.15 mode
UsethemodecommandtosettheradiooptionsforRadio1.Usethenoformofthecommandto
disableRadio1.Themodecommandisaccessiblefromtheap:defaults:4102:radio1contextofthe
CLI.
Syntax
mode <a>
Note: Do not change the default setting for any radio that is not participating in a Mesh or WDS.
<value> SpecifiesthemaximumdistancebetweenAPsinmeters.Thedefaultis
100meters.Youcanenteravaluefrom100to15000meters.
<value> SpecifiestheminimumbasicratevalueinMbps.Validvaluesare6,12,
and24.
Note: Depending on the radio mode you select, some of the radio settings may not be available for
configuration.